Can thermal conductive silica gel film be coated with silica gel? What should we pay attention to?

Among many materials, the use of thermal conductive silicon film is undoubtedly very extensive. It uses silica gel as the raw material,  then selects metal to make it. It is widely used as a whole,  its performance is relatively stable. But in fact, many friends don't know that thermal conductive film  silica gel are actually two different things, so some people wonder whether they can be coated with silica gel? What should we pay attention to? Let's learn  different perspectives.

1. What are the characteristics of thermal conductive silicon film?

As for the answer to the question of whether the hot silicon film can be coated with silica gel, let's first look at the characteristics of the film. First of all, in terms of shape, it is cut into block materials of different sizes after a series of processes; second, the material itself is self-adhesive, which is relatively simple in later installation  can be reused, so the product performance is relatively stable; Since it is installed in electronic products, its main function is heat conduction, which can keep the temperature of products in a stable state in use,  silica gel material is also script insulation. Above, mainly is some characteristics of film.

2. What are the characteristics of silica gel?

We talked about some features of thermal conductive film, so let's see what features silica gel has. First of all, in terms of form, it is different  film. It is mainly in the form of paste, which can be solidified under certain temperature conditions,  has certain extension effect  cohesiveness. Its own thermal conductivity is also good, which is usually used in some products with higher power; However, its overall shape is relatively fixed,  its thickness  hardness can  be adjusted freely, so the scope of application of the whole is actually limited.

3. Can the film be coated with silica gel?

Through the introduction of film  silica gel in front of us, I think you also know some differences between the two products. In fact, you may also know about the question of whether the hot silicon film can be coated with silica gel. The two products are originally different, with their own applicable products,  the film itself is also self-adhesive, which can be installed directly during the installation,  the whole process is also relatively convenient,  naturally there is no need to apply silica gel, which increases the thickness of the product instead of normal compression  filling.