UV glue
Details
Features
Parameter
一、Product Brief
| Paste interface material with good thermal conductivity | Good thixotropy, easy to operate |
| Good extrusion resistance long-term use reliability |
二、application area
| LED | Power battery |
| CPU | Consumer electronics |
| Communication equipment | New energy vehicles |
| Aerospace | network terminal |
三、technical parameter
| series | HQ-G20 | Test standard | ||||||
| colour | White | VisuaL | ||||||
| component | Metal oxide silicone oil | HUIQI METHOD | ||||||
| density (g/cc) | 2.5 | ASTM D297 | ||||||
| Volatilization rate（24H@200℃）% | ＜1.0 | HUIQI METHOD | ||||||
| Oil leakage rate（24H@150℃）% | ＜0.05 | HUIQI METHOD | ||||||
| Sustainable operating temperature（℃） | -50 to 200 | HUIQI METHOD | ||||||
| Viscosity(K cps@25℃) | 1800 | Brookfield RVF,#7 | ||||||
| Thermal impedance | 0.050℃-in²/W @ 50 psi | ASTM D5470 | ||||||
| Thermal conductivity(W/m-K) | 1.8 | ASTM D5470 | ||||||
四、Product description
The product is a paste like efficient heat dissipation product, which is filled between the electronic components the heat sink. It can fully wet the contact surface, thus forming a very low thermal resistance interface. The heat dissipation efficiency is much better than other heat dissipation products.
五、Instructions
| 1、Before application: the radiator parts must be cleaned, then silicon grease installation shall be applied immediately to avoid oxidation of the device surface. It is suggested that the silicone grease placed for a long time should be stirred before use; |
| 2、When applying: the thinner the silicone grease is under the condition of full application, the better to completely cover the surface of the device; if the extruded silicone grease is wiped, it should be sealed for future use after each use; |
| 3、If there is settlement, it can be stirred evenly can still be used. |
六、Storage
| Storage validity: 12 months | Storage conditions: cool dry place under normal temperature |
| Relative humidity: RH < 70% |